Atomic Digital Wall Clock
Model: W88631
DC: 012318
POWER UP
•
Install 2-AAA batteries into your clock.
•
For detailed instructions on how to power up your clock, please
• The clock will search for WWVB Atomic time signal for
8 minutes after batteries are installed. Tower flashes.
• If can receive the signal within these 8 minutes, it will
only search after midnight every day.
(UTC 7:00, 8:00, 9:00, 10:00, 11:00)
• If it can not receive the signal within these 8 minutes, it
will search every 2 hours (8 minutes per time) until it
receives, then start to search after midnight every day.
• Hold the DOWN for 3 seconds to start or stop a search for
the WWVB Atomic Time signal.
• For information about WWVB Atomic Time visit:
AA
A
AA
A
WWVB ATOMIC TIME
SETTINGS
1. Hold the SET °F/°C button to enter the settings menu.
2. Press the UP or DOWN buttons to adjust the values.
3. Press the SET °F/°C button to confirm adjustments and move
to the next item.
Settings Menu Order:
1. WWVB time signal (On/Off)
2. Time Zone - 7 time zones
3. DST (Daylight Saving Time On/Off)
4. Hour
5. Minutes
6. Year
7. Month
8. Date
Time Zones
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
ALARM:
Hold to enter alarm settings. “AL” will show. Use UP
and DOWN buttons to adjust. Press ALARM to confirm.
ALARM:
Press to view alarm time. Press again to
activate or deactivate time alarm.
SNZ:
When alarm sounds press SNZ to silence alarm for 10
minutes. Zz will flash.
SET °F/°C:
Press to select Fahrenheit or Celsius
temperature display.
OTHER BUTTON FUNCTIONS
Page | 2
Page | 3
