OPERATION
3.0
3.0
3.0
3.0
3.0
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
This section describes the TimeView 400 display, rear
panel functions, and computer setting information.
3.1
3.1
3.1
3.1
3.1
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
TimeView 400 Display, shown in Figure 3-1, features
green 4.0 inch digits for the hours and minutes, and 2.3
inch digits for the seconds. Display brightness is adjust-
able to suit various lighting conditions. The brightness
potentiometer is accessed through the hole located on the
lower right corner of the clock. A small, flat-bladed
screwdriver is required.
The time displayed can be derived from a NetClock
Master Clock, computer, or manually set. The display is
configurable for 12- or 24-hour time format and time
zone offsets. Refer to Section 3.2.4 for switch configura-
tion information.
TimeView 400
FIGURE 3-1 MODEL 8177 DISPLAY
FIGURE 3-1 MODEL 8177 DISPLAY
FIGURE 3-1 MODEL 8177 DISPLAY
FIGURE 3-1 MODEL 8177 DISPLAY
FIGURE 3-1 MODEL 8177 DISPLAY
Page 3-1
