Spectra Watermakers VENTURA 150, Инструкция по установке и эксплуатации

Страница: 7 / 74

7
Unpack the system and inspect it for damage during shipping. Freight damage must be
reported to the carrier within 24 hours.
Refer to the shipping list for your system to ensure you received all of the components listed.
Do not discard any packaging until you have found and identified all of the parts. The small
installation parts are listed on the kit list.
Getting Started
Ventura 150 - 200T Remote Manual Shipping List:
•
Ventura Remote Manual kit (includes Control Box and Remote Control)
•
Accumulator Assembly
•
Flowmeter and Pressure Gauge Assembly
•
High pressure Clark Pump with membrane pressure vessel
•
Black high pressure prefilter with 5 micron filter
•
Feed Pump Module Assembly with fresh water flush module
•
Remote Manual install kit with black product water tubing
•
Service kit
•
Two lengths 5/8” Hose (25’)
Installation
Study the system layout diagram, component photos, and descriptions before beginning
installation.
Lay out the system. Before starting the installation identify where each module and
component will be placed. Ensure that there is enough clearance around the components for
removal of filters and system service. Make sure you have adequate tubing and hose before
starting. Additional parts may be ordered.
Warning! We will not be held responsible for shortages that are not reported within thirty
days of the ship date.
WARNING
!
THE VENTURA 200RT IS DESIGNED FOR WARM WATER USE. OPERATION IN WATERS BELOW
50
0
F (10
0
C) MAY CAUSE HIGH OPERATING PRESSURES AND INCREASED WEAR ON THE FEED
PUMP.
CAUTION
!