Speco IP-INTB1, Руководство пользователя

Страница: 122 / 123

122
IP Camera User
’
s Manual Speco Technologies
Power Source DC 12V
Power Consumption (Max.) 6W
Operational Temperature -10 deg - +50 deg C RH95% MAX(14 deg F to 122 deg F)
Weight 0.6kg
Video Out 1
Sensor In/Relay Out 1/1
Ethernet Jack RJ45(10Base-T/100Base-TX)
CONNECTIVITY
Protocols HTTP, FTP, SMTP, TCP, IP, DHCP, ICMP, NTP, DNS, DDNS
Browser Internet Explorer
®
Ver. 6.0+
Operating System Windows
®
2000/XP
Processor Intel
®
Pentium
®
Ⅲ 1GHz+( P4 2.4Ghz+ recommended)
REQUIREMENTS
Memory 256MB+ (512MB+ recommended)
Appendix C To solve problem
C-1 Basic Check-point
C-1-1 Booting
z
Check if power plug is connected correctly.
C-1-2 Network cable (LAN cable) and cable connection check
z
Check if network cable is straight LAN cable. Hold each end of both side and check if same
color’s cable is connected to same location in RJ-45 jack or not.
z
Check if network cable connects correctly with THE CAMERA.
z
Check if network cable connects correctly with Hub, IP sharing device and cable modem etc….
*. If you found a problem in the product, first check with “C-1 Basic check point” and solve the problem as
following procedures:
C-2 Troubleshooting by type
C-2-1 Cannot connect with network
z
Check with ‘C-1-2 Network Cable (LAN cable) and cable connection check’.
z
PING Test
In case Camera uses Static/Public IP: input “Ping IP address” to command window of PC
and check response.