Overview
We hope to give you basic information on the operation of the Xtramix X6 (X6) and adequately
describe its controls, switches, and connectors.
The information is intended to help with the technical process when using your X6. Words alone
could not adequately describe how to adjust the controls for every situation you might encounter
with the X6. You should experiment with settings and routing techniques to achieve the best
results for any particular situation. Your ears should be your best gauge of how to adjust the
settings on the X6 to make the sound fit your requirements.
Default Control Settings
Before any attempt is made to operate the X6, it would be a good idea to set all controls to their
neutral positions. This gives you a reference point to work from when adjusting controls and
switches.
All volume controls, including aux sends, aux returns, and master level controls should be set to
their full counter-clockwise setting. All pan controls should be set centered. The exception to this
is the rear panel Solo Trim that has been factory calibrated and does not need adjustment.
All pushbutton switches on the front panel and gain switches on the rear panel should be set to
the out position.
When any future reference is made to the controls or switches on the X6, it will be assumed that
they have been set to their neutral positions.
Operation