Unpacking & Inspection
The XTRAMIX X6 is shipped in a special protective container and was carefully inspected
both mechanically and electrically before shipment. All items should be physically free of
mars and scratches and in perfect electrical order upon receipt. To confirm this, the mixer
and power supply should be inspected for physical damage that may have occurred in
transit. Any damage should be reported to your dealer or delivery company as soon as
possible.
Unpacking the X6
When you remove your XTRAMIX X6 from the shipping box and remove the foam end caps,
you will see that the mounting brackets are attached to X6 so they extend beyond the front
panel, and turned inward to protect the front panel knobs and buttons during shipping
(See Figure 1).
These brackets are to be removed and will be used for 19” rack mounting or as a desktop
stand. To remove these adapters it is recommended the X6 be set on a flat surface on its
rear connectors (knobs facing up). Remove the 3 Phillips screws on both sides of the mixer.
(See Figure 2). Keep the screws and brackets - you will need them.
It would be a good idea to keep the original packaging. If there is ever the need to send it in
for repair, the original packaging guarantees a safe shipment.
Remove 3
Screws
Figure 1.
Figure 2.