13. Line Input Left (Mono)
- This input is used to connect
the left side of a stereo or dual channel source. The (mono)
designation on this jack indicates that this jack should be
used when you have a monaural source.
14. Line Input Right
- This input is utilized to connect the
right side of a stereo or dual channel source. A “stereo”
input channel will only function when both the left and
right inputs are connected.
The stereo input channels of the X6 will work with either
balanced tip-ring-sleeve (TRS) ¼" plugs or unbalanced tip-
sleeve (TS) ¼" plugs.
15. Gain Select
- To optimize the wide range of audio signals
that will normally be interfaced to the Xtramix, each X6
input channel has two gain settings available: 0dB and
12dB. The “0dB” setting is intended for professional audio
equipment that operates at a +4dBu or -18dBFS, and the
“12dB” setting would be for many synth/samplers, or
unbalanced gear that has lower output signal level.
16. Pannable Stereo Direct Outputs
- The standard X6 is
configured with left and right pannable direct outputs. The
X6 may be ordered with direct outputs configured “pre” the
pan pot for customers that do not need pannable direct.
The Direct Outputs provide a balanced line level signal from
the channel and operate at a nominal level of +4dBu.
Together with the 8 groups, the pannable stereo directs
give the X6 a lot of recording power.