6. Monitor A-B Select
- This switch selects either the Monitor-A or Monitor-B outputs
7. Monitor Mute
-This switch mutes the master monitor output without affecting the mix
and headphone outputs. When pressed, the LED directly below will illuminate, indicating
the monitor signal has been muted.
8. Stereo Headphone Master
-This controls the volume of the stereo headphone circuit and
operates independent of the mix master and monitor master. If required, the X6 may be
configured (on side panel) so the source of the monitor and headphone is after (post) the
Mix Master level control.
9. Headphone Jack
- This standard
¼
" TRS stereo phone jack will accommodate most
popular stereo headphones.
10. Mono Select
- When pressed, this switch sums the left and right signal together,
creating a mono composite to the monitor and headphone mix. The operation of the mono
switch does not affect the main stereo mix
11. 2 Track Returns #1 and #2
- These stereo controls adjust the level of a external stereo
source connected to the 2T returns on the rear panel and can be mixed and blended with
the monitor and headphone outputs. This could be a CD player or stereo DAW audio signal.
This stereo signal is not mixed to the stereo mix or 8 groups. Each has an "On" pushbutton
to enable the returns.
12. Power/Solo LED
- This LED indicates the operational status of the Xtramix. This dual
color LED will change from green to red, as a master solo indicator when any solo switch is
pressed.