Speck Badu EcoMV Скачать руководство пользователя

Страница: 8 / 38

SECTION 4 LIMITED WARRANTY - continued

TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT SHALL SPECK PUMPS - POOL PRODUCTS, INC.

OR ITS OFFICERS, DIRECTORS, EMPLOYEES, SHAREHOLDERS, AGENTS, OR REPRESENTATIVES BE LIABLE

FOR ANY SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES OR LOSS, INCLUDING

TIME, MONEY, GOODWILL, AND LOST PROFITS IN ANY WAY WHICH MAY ARISE HEREUNDER OR FROM THE

USE OF OR INABILITY TO USE THE PUMP AND MOTOR OR THE PERFORMANCE OR NONPERFORMANCE OF

ANY OBLIGATION UNDER THIS LIMITED WARRANTY. THIS PARAGRAPH, THE WARRANTY DISCLAIMERS

IN PARAGRAPH 4 ABOVE, AND THE SOLE AND EXCLUSIVE REMEDY SET FORTH IN PARAGRAPH 1 ABOVE

SHALL APPLY EVEN IF SPECK PUMPS - POOL PRODUCTS, INC. HAS BEEN NOTIFIED OF THE POSSIBILITY OR

LIKELIHOOD OF SUCH DAMAGES OCCURRING, WHETHER SUCH LIABILITY IS BASED ON CONTRACT, TORT,

NEGLIGENCE, STRICT LIABILITY, PRODUCTS LIABILITY OR OTHERWISE, AND EVEN IF ANY REMEDY STATED

HEREIN FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES OR LOSS, SO THE ABOVE

EXCLUSIONS AND LIMITATIONS MAY NOT APPLY.

6. This Limited Warranty gives the Buyer specific legal rights, and the Buyer may also have other rights, which vary from

state to state.

7. A return merchandise authorization (“RMA”) must be obtained from Speck Pumps - Pool Products, Inc. before returning

any product. Products returned without an RMA will be refused and returned, unopened, to the Buyer. All returned products

are to be sent freight prepaid and insured for Buyer’s protection to the manufacturer at 8125 Bayberry Road, Jacksonville,

Florida 32256. Under no condition will products be accepted after the expiration of the Limited Warranty Period. Speck

Pumps - Pool Products, Inc. shall not bear any costs or risks incurred by Buyer in shipping a defective pump and motor to

Speck Pumps - Pool Products, Inc. or in shipping a repaired or replaced pump and motor to Buyer.

Technical Support:

Address:

Speck Pumps

8125 Bayberry Road

Jacksonville, FL. 32256

USA

Hours:

(Monday - Friday) 8:00 am to 5:00 pm EST

Toll Free:

800-223-8538

Phone:

904-739-2626

Fax:

904-737-5261

Website:

www.usa.speck-pumps.com

Manufactured by Speck Pumps, Jacksonville Florida USA,

This document is subject to change without notice.

Date of Installation:

Installed by:

Serial Number:

For Service Call:

Содержание Badu EcoMV







































Результаты поиска

Содержание Badu EcoMV

Отзывы:

Похожие инструкции для Badu EcoMV

Бренды по названию

Популярные бренды

Speck Badu EcoMV, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание Badu EcoMV

Отзывы:

Похожие инструкции для Badu EcoMV

Бренды по названию

Популярные бренды