Speck Badu EcoMV, Инструкция по установке, эксплуатации и обслуживанию

Страница: 24 / 38

Part # M017898010000 August 31, 2012
15 ECOTECH EZ
®
Variable Speed Motor/Control
C) Mon-Fri Flow 1 Programming (Flow 2 Programming is similar)
NOTE: Flow 1 settings take precedence over Flow 2 settings if Start Times are the same.)
Setting on and off time the same is not recommended. For 24 hour operation, see page 21.
1. Use (up arrow) and (down arrow) to set the desired
% flow setting.
2. Press the (right arrow). Use the instructions for Setting
the Clock to set the Time On and Time Off on this screen.
3. Use the (left arrow) and (right arrow) to move through
the time and flow setting process. Use (up arrow) and
(down arrow) to increase or decrease Time and Flow.
4. Press Enter when you are finished setting the desired
Flow 1 rate and times of operation. Repeat steps 1-3
to set a 2nd flow rate and time for Mon-Fri operation. If
not, proceed to # 5 below.
5. Press Exit if finished programming or press Enter to
continue.
6. If finished programming, push RUN/STOP button to run
program. (Note: RUN/STOP button should be lit)