manualshive.com logo in svg

Specialized LEVO 2022, Техническое руководство, Страница: 38 / 41

Поделиться
Скачать
Specialized LEVO 2022 Скачать руководство пользователя страница 38

1

2

3

SRAM UNIVERSAL DERAILLEUR HANGER

# PART NAME 

PART NUMBER  QTY

SPEC

TOOL

 TORQUE 

COMMENT

Nm

in-lbf

SRAM Universal Derailler Hanger

S202600002

1

8 mm hex

25

221

WARNING! Correct grease application is critical to rider safety. ONLY apply grease as instructed.

INSTALLATION PROCESS:

 

„

1: Install the UDH hanger assembly into the frame dropout.

 

„

2: Rotate the UDH hanger forward until it is completely seated in the hanger pocket or contacts the rotational stop tab.

Apply grease ONLY to the thru-axle threads. Do NOT apply grease to the frame, UDH hanger, or UDH bolt threads.

The hanger must be completely seated in the hanger pocket or against the frame stop tab when tightened to the specified 

torque.

 

„

3: Install the UDH washer, then thread the UDH bolt through the washer and into the hanger.

 

„

Torque the bolt to specification.The UDH hanger bolt is left-hand threaded.

A reversible (left-hand and right-hand thread) torque wrench MUST be used to ensure proper left-hand thread bolt torque.

PAGE

 

36

2022

TECHNICAL GUIDE

Содержание LEVO 2022










































Отзывы:

Нет отзывов