1
2
3
4
4
B
A
C
6
5
DROPPER HOUSING GUIDE
DROPPER HOUSING GUIDE ASSEMBLY
1: Make sure the tube is completely inserted into the dropper housing guide. Failure to do so will cause housings to snag.
2: Thread the dropper housing from the ICR guide through the guide tube exiting at the top of the dropper housing guide.
3: Guide the housing through the L-bend on the dropper housing guide first, then feed the housing up into the seat tube.
4: Hook the dropper housing over the two center hooks on the guide.
5: Place the dropper housing guide against the upper inside wall of the downtube, aligned with the bottle cage bolts.
6: Insert the bottle cage bolts through the cage and frame and into the dropper housing guide (6). Tighten the bottle cage bolts to specification.
# PART NAME
PART NUMBER
QTY
SPEC
TOOL
TORQUE
COMMENT
Nm
in-lbf
A
Nylon Guide Tube
Different lengths per size
N/A
N/A
N/A
S1 - 385 mm | S2 - 395 mm | S3 - 410 mm | S4 - 430 mm | S5 - 465 mm | S6 - 480 mm
B
Dropper Guide
1
N/A
N/A
N/A
C
Dropper Guide Bolts
2
M5 X 10 mm x 0.8 mm P
3 mm hex
2.8
25
Insert bolts through the water bottle cage before inserting through the frame.
PAGE
3
2022
TECHNICAL GUIDE
Содержание LEVO 2022
Страница 1: ...SCHEMATIC SMALL PARTS 2022 TECHNICAL GUIDE...
