-1°
+1°
HEADSET CUPS
# PART NAME
PART NUMBER
QTY
SPEC
TOOL
TORQUE
COMMENT
Nm
in-lbf
A
Lower Bearing Cup
S212500015
1
Spherical Adapter 1.5” 45° - 54 mm OD x 52 mm ID
N/A
N/A
N/A
NOT SHOWN
B
Upper Zero Offset Bearing Cup
1
Headtube Angle Adjust 0° | 1-1/8” - 41.8 mm ID, 46 X 52.5
N/A
N/A
N/A
C
Upper +/-1° Offset Bearing Cup
1
Headtube Angle Adjust 1° | 1-1/8” - 41.8 mm ID, 46 X 52.5
N/A
N/A
N/A
ADJUSTABLE HEADSET CUP REPLACEMENT.
Remove the zero offset cup from the head tube and replace it with the +/- 1-degree headset cup.
Install the headset parts, bearings, and cups into the frame.
When aligning the headset cup, the etching facing the front of the bicycle indicates the desired setting.
Make sure the head tube and headset cup are free of dirt and debris when changing the upper cup angle. Lubricate all the
parts with high-quality waterproof grease.
All models are shipped with the zero offset cup installed. Switching the headset cup steepens or slackens the head tube angle
by +/-1 degree.
The bottom headset cup is universal for all headset cups. The cup has a spherical interface with the head tube and will move
with the angle of the steerer tube.
PAGE
22
2022
TECHNICAL GUIDE
Содержание LEVO 2022
Страница 1: ...SCHEMATIC SMALL PARTS 2022 TECHNICAL GUIDE...
