TWIGA MID
43
Height Limiter
The Height Limiter option is intended to provide a means to control the maximum
height that the machine can work to but is limited by the setting chosen and the
positioning of the cutting head.
The system is turned OFF and ON via the AUX2 toggle switch on the switch box.
Only the lift function will be limited, all other functions will continue to function.
The max height setting can be adjusted via the bolt on the adjuster bracket. Care
must be taken when choosing a setting to ensure the arm is at max extension and
the full height of the machine is considered i.e. hoses and head rotation. The
sensor should be adjusted to ensure contact is made when the bolt passes, this
can be confirmed as the LED will light when contact is made. The sensor should
be adjusted to have around a 5mm gap to the bolt, again contact should be
confirmed by the LED.