TWIGA MID
35
Hydraulic Rear Roller
The hydraulic rear roller is controlled by the tractor spool. The roller can either be
raised or lowered to the desired position for either hedge or grass cutting.
The hoses to the tractor and valve are supplied with the cutting head, the hoses
down the arm are supplied with the machine.
The valve mounts to the tank via the adaptors fitted. Remove the blanking plugs
from the hoses and fit to the valve and run the hoses to the tractor.
Take the hoses from the ram on the cutting head from inside the sleeving and
locate the two bulkhead adaptors on the arm marked HR (you will need to remove
the arm guard). Remove the blanking caps and attach the hoses. The ram will
need to be operated a few times to purge any air from the system.
Note:
To ensure the roller moves freely it's important to keep the roller linkage clean and
lubricated.