background image

8999123: v1 18/06/2018 

Page 1.4 of 1.10 pages 

 

    Original instructions (ENGLISH) 

Website:  www.spearheadmachinery.com 

 

Destroyer Flail HD250F Flail Mulcher 

 
This manual contains the instructions for installation, use and maintenance of the Destroyer Flail HD250F Flail 
mulcher hereafter more simply called the ''Mulcher.'' 
 
The mulcher is designed and built to mulch branches, overgrown vegetation and trunks up to 30 cm in diameter. 
Any other use is deemed improper and, therefore, potentially dangerous for the safety of the operator or of any 
exposed persons. This manual is an integral part of the mulcher, defines the scope for which it was built, and 
contains all the information required for its proper and safe use. 
 
Regular machine operation depends on its correct use and adequate maintenance: it is advisable, therefore, to 
follow these instructions carefully to prevent any situation that could compromise 

the machine’s operation and 

durability. It is also important to follow that which is described in this manual since Spearhead declines any liability 
resulting from negligence of from not observing these norms, since it would result in the warranty being annulled. 
 
It is mandatory to verify upon delivery that the mulcher is integral and complete in all its parts. Any complaints must 
presented in written within 8 (eight) days from receiving the machine. Spearhead can however be contacted at any 
time for immediate and precise technical assistance and anything required for optimum operation and maximum 
performance of the equipment. Upon receiving the product, carefully read the manual and carefully follow the 
instructions contained in it.

 

 

IMPORTANT 

 

All technical material or description in this manual is exclusively owned by Spearhead who prohibits 

the complete or partial reproduction of the same unless written approval has been issued by the 

Spearhead. 

 

Data, illustrations and descriptions in the manual cannot be considered binding. Spearhead reserves 

the right to make changes at any time that it considers to be suitable for improvement or for a 

constructive or commercial requirement. 

 

This manual reflects the state of techniques at the time of marketing the flail mulcher and cannot be 

considered inadequate if updated at a later date due to modifications of related legal provisions. 

 

Spearhead declines any and all liability for damages caused by the flail mulcher to persons, 

animals or property, resulting from use other than that described in this manual, or due to 

damage caused by negligence or by not observing the instructions contained in this manual. 

 

The manual should be carefully stored in a suitable area to guarantee its physical integrity; it should 

be easy to access by anyone authorised to consult it. The manual is an important document that 

should accompany the flail mulcher and all users should be held responsible for safeguarding it. 

 

For additional information or clarifications regarding anything contained in this manual, or if the 

manual deteriorates, is destroyed or lost, using the flail mulcher is prohibited and it is mandatory to 

request a new manual as soon as possible exclusively through: 

 

Spearhead Machinery Limited 

Green View, Salford Priors, 

Evesham, Worcestershire, WR11 8SW 

Direct download via Spearhead’s online PDF manual library 

http://dealerinside.spearheadmachinery.com/dealerinside/manuallibrary/default.aspx 

 

For technical enquiries email: 

[email protected]

 or call +44 (0)1789 491867 

For parts enquiries email

[email protected]

 or call +44 (0)1789 491862 

 

The following manual is an integral part of the product and must be stored carefully, in order 

that it keeps its integrity and can be consulted repeatedly throughout the entire life of the flail 

mulcher. 

 

The flail mulcher is manufactured to conform to the provisions contained in Directive 2006/42/EC. It 

is therefore equipped with EC marking and accompanied by the following EC conformity declaration. 

Содержание HD250F











































Отзывы: