background image

8999123: v1 18/06/2018 

Page 1.10 of 1.10 pages 

 

    Original instructions (ENGLISH) 

Website:  www.spearheadmachinery.com 

-- 

Tractor with open cab: 

Equivalent weighted sound pressure average level: LpAm = 80.7 dB(A). 
 
-- 

Tractor with closed cab:

 

Equivalent weighted sound pressure average level: LpAm = 78.8 dB(A). 
Sound power level: LwA = 107.1 dB(A). 
 
The level of airborne noise emitted by the mulcher is indicated with reference to the provisions set out in Directive 
2006/42/EC and does not consider the provisions of Directive 2000/14/EC concerning the environmental noise 
emission by machinery and equipment intended for outdoor use because the machine is not included in Annex I - Part 
A of Legislative Decree no. 262 of 4 September 2002, legislative implementation of the above mentioned Directive. 
 

1.6 

EC marking of the flail mulcher 

 
Directive 2006/42/EC specifies the minimum conditions with which a machine can be placed on the EU market. All 
machines can only be marketed and put into service if the health and safety of persons, domestic animals or property 
are not affected. The mulcher is not an actual machine because it does not have its own drive system, however, for 
legal purposes, it is considered interchangeable equipment because once it is coupled to the agricultural tractor it 
provides a new function to the assembly and in all respects it is equivalent to a machine and must therefore meet the 
essential health and safety requirements of the Machinery Directive. 
 
The mulcher does not fall under one of the machine categories indicated in the list set out in Annex IV of the Directive 
(particularly dangerous machinery). In order to certify the conformity of the machine with the provisions of Directive 
2006/42/EC, before placing the product on the market, Spearhead applied the procedure described in Art. 5. In this 
sense, the manufacturer has provided for: compliance with the relevant safety requirements; availability of the technical 
file as stipulated in Annex VI; implementation of all the tests and inspections required by the reference standards and 
compliance with the essential health and safety requirements indicated in Annex I of the Directive itself. The 
construction technical file, which contains the basic project information and all the characteristics related to machine 
safety, was drafted in accordance with the provisions of Annex VI-Part A, and can be made available by the individual 
indicated in the CE Declaration of Conformity for any verification carried out by the supervisory authorities, following a 
justified request, as provided for by the relevant laws in force. 
 
Once Spearhead has verified that the machine has been designed and built in accordance with the provisions of 
Directive 2006/42/EC and that it can be used safely in the service conditions specified in this manual, it places the flail 
mulcher on the market and accompanies the machine with: 

- Usage instructions booklet (User manual) 
- EC Declaration of conformity 
- EC Marking 

 
In designing and manufacturing the mulcher, Spearhead has complied with obligations resulting from applying related 
European legislative provisions and precisely the following European provisions: 
- Directive 2006/42/CE (Machinery safety). 
 
For verification of conformity to European legislative provisions indicated above, the manufacturer applied the following 
European standards and technical rules: 

- EN 349:1993+A1:2008:

 MACHINERY SAFETY - Minimum distance to keep from crushing human body parts. 

- EN 1037:1995+A1:2008:

 MACHINERY SAFETY - Preventing unexpected start-up. 

- EN ISO 3746:2010:

 ACOUSTICS - Determining the sound power levels of sources using sound pressure - Control 

method on a reflecting surface by measuring an enveloping surface. 

- EN ISO 4254-1:2013:

 AGRICULTURAL MACHINERY - Safety - Part 1: General requirements. 

- EN ISO 4254-12:2012:

 AGRICULTURAL MACHINERY - Safety - Part 12: Disc and drum rotary mowers and flail 

mowers. 

- EN ISO 11202:2010:

 ACOUSTICS - Noise emitted by machinery and equipment 

– Determination of emission sound 

pressure levels at a work station and at other specified positions 

– Site control method 

- EN ISO 12100:2010:

 MACHINERY SAFETY - Basic concepts, general principles for design. 

- EN ISO 13524:2009:

 Machines for road maintenance - Safety requirements. 

- EN ISO 13849-1:2008:

 MACHINERY SAFETY - Safety-related parts of control systems - Part 

1: General principles for design. 

- EN ISO 13857:2008: 

MACHINERY SAFETY - Safety distances to prevent hazard zones being reached by upper and 

lower limbs. 

- EN 15436-1:2008:

 Equipment for maintenance of green areas along road sides - Part 1: Terminology. 

- EN 15436-2:2008:

 Equipment for maintenance of green areas along road sides - Part 2: Performance evaluation. 

- CEN/TS 15436-3:2009:

 Equipment for maintenance of green areas along road sides 

– Part 3: Classification. 

- EN 15436-4:2009:

 Equipment for maintenance of green areas along road sides - Part 4: Acceptance of delivery of the 

machines by the user.

Содержание HD250F











































Отзывы: