8999123: v1 18/06/2018
Page 4.2 of 4.5 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
WARNING!
To carry out these operations the P.T.O. must be disconnected. The tractor must be braked and
off.
4.2.1.1. Place the machine on a level surface with two spacers of approx. 12 cm set inside the machine at the rotor
ends. Brake the tractor, switch it off and remove the keys from the dashboard.
4.2.1.2. Remove the bolts (D), see Figure 4.2.
4.2.1.3. Adjust the position on the skid (E) taking care to move it by the same amount, both in front and at the back.
4.2.1.4. Reassemble bolts (D) and tighten them.
4.2.1.5. Perform the same operation for the opposite skid.
4.2.1.6. Start up the tractor and move the machine.
Figure 4.2
4.2.2
Adjustment of working height
To correctly adjust the working height of the mulcher, it is necessary:
-- The adjustment must be carried out using the adjustable top link of the tractor, see Figure 4.3.
Figure 4.3
