16
AFTER SALES SUPPORT
0345 605 2067
WARNING!
Read all of the instructions of this
manual before attempting to connection the
power supply for your tool.
WARNING!
If the insulation on a power cable or
extension lead is found to be cut or damaged,
do not touch it! Disconnect the power supply
immediately and have the damaged cable
replaced by authorized service agent.
WARNING!
If operating the appliance in a damp
location is unavoidable, use a residual current
device(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
WARNING!
Use only extension cords suitable for
outdoor use, preferably with a high visibility
cable colour.
Always unwind all extension cables fully, coiled
cables can overheat and reduce the efficiency
of your product.
NOTE!
For extension cables up to 15metres, use
a wire cross section of 1.5mm
2
. For extension
cables over 15 meters but less than 40 meters,
use a wire cross section of 2.5 mm
2
.
WARNING!
This product is designed to operate
on 230-240 VAC 50Hz.The voltage and current
must comply with the information on the
ratings label!
NOTE!
This electric rotovator is fitted with
a non-rewireable plug. If it is necessary to
change the fuse in the plug, the fuse cover
becomes lost or damaged, the plug must
not be used until a suitable replacement is
obtained.
WARNING!
A 13amp fuse must be fitted.
WARNING!
Make sure the on/off switch is in its
off position.
PREPARE
