17
AFTER SALES SUPPORT
0345 605 2067
PREPARE
1. Connecting the extension cord to a suitable socket
Double the extension cord, about a foot from the end. Push
the loop through the hole on the rear safe guard and hook
the loop over the cord restrainer(A). Gently pull on the cord
to ensure that it is firmly attached at the handle. Connect the
cable to a proper socket.
2
.
Switch on/off
WARNING!
Rotating blades may cause serious
injury. The blades will continue to turn for a few
seconds after the tool has been switched OFF.
Do not touch the rotating blades. Contact with
hot components (i.e. motor housing, gear box,
etc.) on the machine may
Switching on
1. Press the lock button (A).
2. Hold the switch trigger (B) and release the switch button (A).
Switching off
Release the switch trigger (B).
Note!
For your safety, this tool is equipped with a double switch
system. This system prevents starting the tool inadvertently.
You must press the switch button (A) firstly, and then hold the
switch trigger (B).
Never attempt to hold the switch trigger without pressing the
lock button first!
WARNING!
Always wear safety gloves when
doing any work on the electric rotovator. Always
unplug the power cord from the power source
before doing any work on the electric rotovator.
A
B
