Spartherm Quadra Inside I SL, Инструкция по установке и эксплуатации

Страница: 14 / 36

GB
14
3.6.2 INSTALLATION OF QUADRA INSIDE I / II / III SL
• The Quadra Inside must be installed and
aligned in the prefabricated aperture in the
cover plate / table-top.
• Open the housing cover as follows:
• After this, the housing with cover plate /
table-top is bolted firmly to the 6 spacer
brackets with 6 screws. For this, appropri-
ate fastening screws must be selected.
• Install the burner in the housing.
3.6.1.3 QUADRA INSIDE III SL
• The minimum dimension of cover plate / table-top (Fig. 8) measures at
least 1751 x 400 mm (width x depth).
• The cutaway for the Quadra Inside III SL measures 1701 x 223 mm and
is cut centrally into the cover plate / table-top.
1
Quadra Inside III SL
2 Cover plate / table-top
• The minimum distance between housing and housing area base (Fig. 9)
measures 70 mm.
• Ensure that additional air can flow into the housing area without obstruc-
tion. Free minimum cross section for additional air is 600 cm². For this,
appropriate additional air apertures must be provided.
Fig. 8 Minimum dimensions for upper/table-top plate
Fig. 9 Minimum dimensions for housing space
min. min.