Spartherm Quadra Inside I SL, Инструкция по установке и эксплуатации

Страница: 11 / 36

GB
GB
11
6. In areas accessible to the public which are not supervised.
7. In areas which are not protected against transverse ventilation
8. On tables, pieces of furniture, shelves etc.
3.5 INSTALLATION/ASSEMBLY
The ebios-fire Quadra Inside appliances are turnkey units for installation
in the cover plate of a bespoke furniture item (combustible materials) or
in a tailor-made open fireplace (non-combustible materials). No flue gas
extraction is required for bespoke fireplaces featuring the Quadra Inside SL.
The ebios-fire furniture item, which may be free-standing or wall-mounted,
must be aligned horizontally and secured to prevent tilting. Rear ventilation
must not be closed. Place the burner with reactor containment and cover
plate into the receiving units provided in the Quadra Inside. Floor-mounted
furniture may only be set up on floors with sufficient load-bearing capacity.
If the load bearing capacity is not sufficient, suitable measures must be
taken (e.g., plate for load distribution) to remedy this. Use suitable fasten-
ing material (wall plugs, screws etc.) when securing to the wall.
NO design modifications whatsoever are permitted to the design of the
Quadra Inside SL models.
3.6 GENERAL NOTES FOR INSTALLATION IN BESPOKE
FURNITURE ITEMS
• In all cases involving bespoke furniture design for installation with
Quadra Inside SL, they at least comprise a cover plate/table-top and a
housing area with an additional air intake. No housing area is needed for
table-top installations, but it would be advisable to have one.
• During installation in a bespoke furniture item (combustible materials),
always bear in mind that the Quadra Inside must NOT be installed in a
furniture niche.
Risk of fire!
• There must be no objects between the Quadra Inside SL and room ceil-
ing (distance to the ceiling >1000 mm)!
• The Quadra Inside SL may only be installed in the cover plate / table-
tops of a furniture item. (example: bureau, sideboard, pull-out cabinet,
table)
• The Quadra Inside must always be bolted to the cover plate / table-top.
• The furniture items must always be securely mounted to the wall or
to the floor and secured to prevent any accidental movement, toppling
and/or lifting action. For this, appropriate fastening material must be
selected.
• All inlet apertures and rear ventilation features must be left unob-
structed, and must not be blocked since otherwise a heat build-up would
take place.
Risk of fire!