Spark SS-36-N, Руководство владельца по эксплуатации и инструкции

Страница: 22 / 36

INSPECTING BURNERS
Check pilot flame pattern and burner flame pat-
terns often.
PILOT FLAME PATTERN
MAIN BURNER
Periodically inspect all burner flame holes with the
heater running.
Some burner flame holes may become blocked
by debris or rust, with no flame present. If so, turn
off heater and let cool. Remove blockage. Blocked
burner flame holes may create soot.
FRONT BURNER FLAME PATTERN
• turn fireplace off (see To Turn Off Gas to Ap-
plianc
e).
The incorrect pilot flame is not touching the
flame sensor
. This will cause the
flame sen -
sor to cool. When the flame sensor cools, the
fireplace will shut down.
CLEANING AND MAINTENANCE
.
Note:
The correct pilot flame on natural gas units
will have a slight curve, but flame should be blue
and have no yellow or orange color.
If pilot flame pattern is incorrect
.
Figure
7
- Correct
Pilot
Flame Pattern
Figure
7
shows a correct pilot flame
.
Figure 8 shows correct burner flame
pattern
withpatern with yellow flame tips and blue base.
Figure 9
shows incorrect flame pattern.
The
incorrect bur ner flame pattern shows lazy orange
flame.
I f b u r n e r f l a m e p a t t e r n i s i n c o r -
r e c t , as shown in
Figure
9 :
Figure
8
- Correct Burner Flame Pattern
Figure
9
- Incorrect Burner Flame
Pattern
caused by port blockage
IMPORTANT!
List when you order a replacement burner.
If it is evident that the burner is damaged, the
burner must be replaced prior to appliance being
put into operation. Please refer to Illustrated Parts
• see Troubleshooting , page
2
4
.
2 2
• turn fireplace off (see To Turn Off Gas to Ap-
pliance , page
.
19
).
• see T r oubleshooting , page
2 4