Spark SS-36-N, Руководство владельца по эксплуатации и инструкции

Страница: 14 / 36

1 3
SIDE VIEW
ELECTRICAL WIRING
WARNING
Label all wires before disconnecting when
servicing controls. Wiring errors can cause
improper and dangerous operation.
CAUTION
Electrical connections should only be performed by a qualified, licensed electrician.
Main power must be off when connecting to main electrical power supply or performing
service. All wiring shall be in compliance with all local, city, and state codes. The
appliance, when installed, must be electrically grounded in accordance with local
codes, or in the absence of local codes, with the National Electrical Code ANSI/ NFPA
70 (latest edition) and Canadian Electrical Code, CSA C22.1.
INSTALLATION
Continued
Please, call manufacturer f or directions how to find additional DC terminals inside of the fireplace.
*) IMPORTANT:
Floor must be non-combustible
. Otherwise a minimum
1" thick cement board must be placed under the fireplace.
Clearance to
Combustibles
Sides...............0"
Bottom.............*)
Side Wall ......16"
Standoffs.........0"
Back ...............0"
1 4
This fireplace requires 110V AC electrical supply for normal operation in order to
power up supplied 7V AC/ DC adapter which is required to operate Remote Control.
However, during power outage situation, its electronic system (DFC board) can be
temporary powered with 9V DC batery and main valve can be operated manually
using ON/OFF position of the remote control (or optional Manual Switch if installed).