Sparc Enterprise M3000, Руководство по установке

Страница: 47 / 68

Appendix A Server Views A-5
A.2 Operator Panel Overview
If no network connection is available, the operator panel is used to start or stop the
system. The operator panel has three LED status indicators, a power button, and a
mode switch (key switch). The panel is located at the center on the front of the
server.
While the system is running, the Power LED and the XSCF STANDBY LED (green)
should be on, and the CHECK LED (orange) should not be on. If the CHECK LED is
on, search the system logs to determine what is wrong.
The three LED status indicators on the operator panel show the following:
■
General system status
■
System problem warning
■
System fault location
FIGURE A-4
shows the operator panel of the server.