Sparc E35202-05, Руководство по установке

Страница: 30 / 62

Install Optional Components
30 SPARC T5-1B Server Module Installation Guide • May 2014
Note -
For more information about preparing the modular system and CMM Oracle ILOM,
refer to the Sun Blade 6000 Modular System Installation Guide .
2. Unpackage the server module.
Be ready to insert the server module within 60 seconds of removing the filler panel.
3. Install any optional components.
See “Install Optional Components” on page 30 .
Related Information
■
“Install Optional Components” on page 30
■
“Insert the Server Module Into the Chassis” on page 31
Install Optional Components
Optional components that you order as part of the server module's initial configuration are
installed in the server module before it is shipped. These optional components are identified on
the customer information sheet included with the server module's packaging.
However, if you ordered optional components separately, you must install them in the server
module before you install the server module in the modular system chassis.
1. Install any optional components in the server module.
To install any optional components, refer to the Server Module Service Manual and to the
documentation for the optional component.
2. Close the server module.
3. Insert the server module into the chassis.
See “Insert the Server Module Into the Chassis” on page 31 .
Related Information
■
“Prepare the Modular System and Server Module” on page 29
■
“Install Optional Components” on page 30