Spanset 5-2696, Инструкция по эксплуатации

Страница: 6 / 24

6
Product Lifespan
All equipment should be used, stored and transported in the following manner:
- To prevent contact with sharp objects that may damage the fi bres of the webbing.
- Away from harmful substances such as acids, alkalis, fuel, paints, solvents that harm polyester and nylon fi bres.
- Kept in a cool dry place free from direct sunlight, to prevent degradation of the fi bres from ultraviolet radiation.
- Wetness of the equipment should be allowed to dry naturally away from direct heat.
PRODUCT LIFESPAN
It is mandatory by European Law that all PPE must be supplied with comprehensive User Instructions which detail the lifespan of
the product, and the inspection requirements.
The actual frequency of the periodic inspection is the responsibility of the competent person in charge of the maintenance of the
product. Aggressive or arduous conditions and constant use will potentially reduce the working life of the product and so a more
frequent inspection regime will be required to effectively monitor this.
SpanSet recommend that PPE for Work at Height is thoroughly examined by a competent person:
- Periodically at intervals not exceeding 6 months
- Interim inspections where required
SpanSet recommend that Pre Use inspection is carried out by the user before each and every use. Any concerns about the
condition of equipment must result in the item undergoing a thorough interim inspection.
The equipment should only be used if it is found to be in a fi t condition.
In addition SpanSet give this product a period of obsolescence of 10 years from date of manufacture, even if never used.
Products should be withdrawn from service if they meet any one of the following criteria:
1) Failure of a thorough examination
2) Subjected to or Used to arrest a fall
3) Manufacturers period of obsolescence (shelf-life) has been reached
Compatibility and use of PPE is the responsibility of the user.
CLIMA WORK
INSTRUCTIONS