3
1. Safety Precautions
VITAL:
Electrical power must be switched off before starting any work on heat pump.
DO NOT attempt to modify the internal configuration of the heat pump. Read the entire
installation manual before use or service.
The unit must be earthed to avoid any risks
caused by insulation defects. The heat
pump will be earthed via the pre-installed
power cable which connects to the spa
control. If a different power source is used,
ensure heat pump is connected to earth.
You can clean the evaporator by washing
with detergent and water at low pressure,
and then rinsing with clean water.
Do not spray or paint insecticidal material
on the surface of the unit.
Do not touch the air outlet grill when fan
motor is running.
Children should be supervised to ensure
that they do not play with the appliance.
The installation, commissioning and
maintenance of these machines should be
performed by qualified personnel having
a good knowledge of standards and local
regulations, as well as experience with this
type of equipment.
It is the responsibility of the installer
to ensure circuit breaker protection,
considering the heat pump capacity. The
heat pump should also be supplied through
a residual current device (RCD) having
a rated residual operating current not
exceeding 30mA.
Do not block the evaporator by paper or
any other foreign bodies, to keep the unit
well ventilated.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Содержание Power Smart SHP-100
Страница 23: ...23 ...
