Spaceman SM-6690H, Руководство по эксплуатации машины, Страница: 13 / 24

www.spacemanusa.com
Phone: (720) 328-1020 Email: service@spacemanusa.com
6b
5c
5d
5a 5b
5e
5f
5j 5k
5i
5h
Cleaning: 4. Assemble
a. Place O-rings (2) on draw valve, coating with
Spaceman lubricant
b. Insert draw valve 7/8 way into the dispensing
door from the top, rotating as you install
c. Turn draw valve so the flat portion at the valve
top is perpendicular to the clear face of the
dispensing door
d. Insert ice buster through the dispensing spout at
the bottom of the door and into the slot on the
draw valve
e. Rotate draw valve to lock ice buster in place; turn
valve until the hole for the draw handle is
accessible on front
f. Insert draw handle; secure in place with valve pin
g. Screw prime plug onto dispensing door
h. Place dispensing door gasket on door, coating
with Spaceman lubricant
i. Place beater guide onto dispensing door, with
flange flush with the back of the door
j. Align door assembly with torque assembly and
mounting bolts; carefully lift curved sensor arm
out of the way, and install dispensing door until
flush with machine; if needed, gently wiggle
dispensing door to get the beater guide to line
- up
correctly inside the beater; DO NOT force the
dispensing door onto the machine
k. Lifting door up, tighten dispensing door hand-
screws (4) in a cross-pattern
l. With tapered end down, install torque arm up
through the flat sensor arm and then down into
the torque assembly; torque arm should move
freely back and forth;
DO NOT LIFT UP ON
CURVED SENSOR ARM
5. Install dispensing door
12
5g
5l
6a
6a
6b
6. Install hopper assembly and drip trays
a. If machine has hopper agitator, lubricate
inside it and install with arrow pointing up
b. Install hopper lid and drip trays (internal
and front)
6b