manualshive.com logo in svg

SP VirTis BenchTop 2K, Руководство оператора

Поделиться
Скачать
SP VirTis BenchTop 2K Скачать руководство пользователя страница 5

Revision 004, 12/09 

 

iii

 

© SP Industries, Inc. 2009 

Warranty Information 

VirTis BenchTop 2K, 4K and 6K are warranted by SP Industries to be free of defects in material and workmanship when 
operated under normal conditions as specified in the instructions provided in this manual. Please take this opportunity to locate 
the serial tag on your new VirTis BenchTop 2K, 4K and 6K and record the information below for future reference. SP Industries 
also recommends that you complete and return your unit’s warranty registration card. 
 
Model Number 

 

 

 
Serial Number 

 

 

 
Part Number 

 

 

 

 

 

Limited Warranty 

 

SP Industries (the “Company”) warrants each of its products against any defects in material or workmanship, provided that the 
product is used in a reasonable manner under appropriate conditions and consistent with the applicable operating instructions, 
for a period of 12 months from the date of installation or 15 months from the date of shipment (whichever comes first). 
 
The obligation of the Company shall be, at its option, to repair or replace, without charge any parts that prove to be defective 
within the warranty period, if the purchaser notifies the Company promptly in writing of such defect. The Company shall not be 
responsible for labor charges payable with respect to persons other than Company employees. Replacement or repair of parts 
pursuant to this warranty shall not in any way extend the original warranty period. The Company will not be responsible for any 
unauthorized repairs, replacements or product modifications, nor will it be responsible for any product failures resulting from 
such unauthorized repairs, replacements or product modifications negligently or otherwise made by persons other than 
Company employees or authorized representatives of the Company. 
 
THE COMPANY DOES NOT MAKE AND EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WITH RESPECT TO THE 
SALE, INSTALLATION, DESIGN OR USE OF ITS PRODUCTS. ADDITIONALLY, THE COMPANY SHALL NOT BE LIABLE 
FOR ANY CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF OR ANY DEFECTS IN ITS PRODUCTS. 
 
The Company’s employees are available to provide general advice to customers concerning the use of the Company’s 
products; however, oral representations are not warranties with respect to particular products or their uses and may not be 
relied upon if they are inconsistent with the relevant product specifications for the items set forth herein. 
 
Notwithstanding the above, the terms and conditions set forth in the Company’s formal sales contracts shall be controlling and 
supersede any inconsistent terms contained herein, and any changes to such contracts must be made in writing and signed by 
an authorized executive of the Company. 
 

 

 

 

 

 

 
 
 
 

Содержание VirTis BenchTop 2K

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды