SP Scientific ULTRA-COOL, Руководство оператора

Страница: 30 / 64

System Control Ultra-Cool
22 Rev 008, 01/12
© SP Scientific 2012
Display Decimals / Integer (dP = 1)
If set to one, decimals will be displayed, and decimal entry permitted. If set to zero,
decimal readout will be suppressed (integer format). Additionally, certain values (
e.g .,
SP) will also be restricted to integer display and entry. However, residual decimals
will be carried internally. Should the user desire integer format, the SP should be
corrected to xx.0 prior to suppressing the decimal point.
Audible Alarm (nOIS = 1)
The audible alarm is a piezoelectric device and has three modes of operation.
Display Alarm Applications
0
1
2
Off
5 second chirp Alarm
Continuous Sounding
Hospital
Normal Operation
Industrial Applications
Power Failure (PF = 0)
The power failure recovery mode setting determines what the controller will do when
power is restored following a power failure. The alphanumeric display will also show
“PF” which will indicate that there was a power failure at some time. The “PF” will be
displayed until any switch on the controller is pressed.
Temperature Scale (dEg = 0)
All temperature entries and readouts may be adjusted according to the following:
Display Scale
0 Celsius
1 Fahrenheit
2 Kelvin