SP Scientific LYOSTAR II, Руководство оператора

Страница: 21 / 72

FTS Systems LyoStar™ II Operating Your Lyophilizer
Rev 012, 04/11 13
© SP Scientific 2011
When the run is complete, return to the Automatic or Data screens and press 13.
the Finish button. If the system has not completed the run, a Stop button will
be displayed instead of the Finish button. You may stop the unit by using the
Stop button prior to the run being completed at any time.
Return to the Leak Rate Test screen and print the results. These results can 14.
be used to compare the performance of your unit at any time.
System Testing
From the Automatic Mode Select screen, select System Test from the menu. 1.
The System Test screen will be displayed on the screen. 2.
Enter values to test the performance of the unit. The values SP Scientific uses 3.
during QC testing are shown here. Values may be altered but should be run
consistently thereafter to accurately compare performance from run to run.
If desired, customize the system test data headings at this time by clicking on 4.
the “System Test Run Number” and “Operator” fields and typing in the
appropriate information. Clear these fields now if no information is required.
Select the Start button to begin the run. 5.
The software will prompt, "Are you sure?" Click on Start to begin the run. 6.
Alpha numeric data collection begins automatically. The alpha numeric data 7.
collection window now opens on the screen. This window can be minimized in
the Windows fashion at any time.
When the run is complete, return to the Automatic or Data screens and press 8.
the Finish button. If the system has not completed the run, a Stop button will
be displayed instead of the Finished button. You may stop the unit using the
Stop button prior to the run being completed at any time.
Return to the System Test screen and print the results. These results can be 9.
used to compare the performance of your unit at any time.