Soyer BMS-10P, Руководство по эксплуатации

Страница: 36 / 54

36
Ensure stud protrusion is set between 1.5 mm – 3 mm!
Adjusting and checking the height of lift
The height of lift is the distance for which the weld stud is
lifted from the workpiece during the welding process
.
The height of lift should amount to approx
.
2 mm.

Switch the BMS-10P stud welder on using the main switch.

Choose operation mode "LIFT" on the stud welder.
NOTE:
If the lift test is carried out on a workpiece which is connected to the earth connection of the stud
welder, the drop time will be shown in milliseconds on the display. If the workpiece is not connected to
the earth connection, "No grounding" will appear on the display.

Position welding gun on the workpiece

Press push button. The gun lifts the chuck with weld
stud away from the workpiece
Adjustment of the gun lift is achieved by turning the rear
adjustment cap of the welding gun to the left or to the right.
Anti-clockwise rotation increases the gun lift and conversely
clockwise rotation reduces the gun lift.
The height of lift should amount to approx. 2 mm.