Soyer BMS-10P, Руководство по эксплуатации

Страница: 14 / 54

14
3 Description of stud welder
3.1 Description
The BMS-10P SOYER stud welder is universally applicable for both manual and automatic operation.
Control via a serial CNC interface is possible.
The BMS-10P stud welder enables the storage of parameters for various welding tasks as welding
programs. These parameters can be recalled at any time. To simplify operation, it is possible to store
programs for different stud diameters. This allows a more rapid and simpler interchange of different
welding tasks. The integrated quality control allows the most important parameters of the weld to be
monitored and any welding faults to be reported when inadmissible deviations occur.
The stud welder is equipped with eight keys, eight light-emitting diodes (LED) and a two-lined text
display at the front panel. The stud welder is adjusted via the keys. The operating state during welding
is shown by the light-emitting diodes and on the display.
3.2 Capacitor discharge stud welding technology
The BMS-10P SOYER stud welder runs according to the principle of capacitor discharge with tip
ignition as defined in DVS Leaflet 0903 (DVS = German Welding Society).
This system uses the sudden discharge of a capacitor battery to generate arc energy.
Stud tip touches workpiece. Ignited arc generates a fusion
zone on stud and workpiece.
Stud is plunged into the
welding pool. Material solidifies
and stud is welded.
For further information, please refer to www.soyer.de
IMPORTANT INFORMATION
Ensure that the surface is electroconductive.
Grind coated parts.