12
ZLS SERIES — FLOOR HEIGHT LIFT TABLES
ZLS Series Owner’s Manual
OPERATING PROCEDURE
AND PRECAUTIONS
1. Before operating the lift, please read this whole
section. If your lift has any optional modifications or
accessories, information on these will be included
at the end of the manual.
DANGER!
The lift may use a power supply of up to 440
Volts AC. This voltage can kill. Do not work
with the electrical parts unless you are a
qualified electrician!
2. Load the lift correctly.
• Be sure that the load weighs no more than the
maximum rated for the lift.
ZLS2
2000 lb. (900 kg.)
ZLS4
4000 lb. (1800 kg.)
ZLS6
6000 lb. (2700 kg.)
WARNING!
Do not try to lift a load that exceeds the
maximum rating. If you try this, the lift may
fail suddenly. Someone may be hurt, and
the lift and load may be damaged.
• Place the load in the center of the lift table, as shown
in Fig. 3.
• Do not try to load the lift while the lift table is moving.
• If you are lifting pipes or other objects which may
be able to roll or move, fasten them down, or hold
them in place with blocks as shown in Fig. 4.
3.
Be sure all workers are clear of the lift.
Remove
any lumber or other material that may fall onto the
lift.
WARNING!
Do not use the unit to lift people! This lift is
not designed for this purpose. It does not
have the special safety features required
for this type of service. If the lift drops
suddenly, anyone riding on the lift may be
hurt.
Fig. 4 – Center the Load
Fig. 5 – Secure the Load
