15
Southworth Products
SR-44 Manual
5.3 Operation Instructions
1.
Press and hold the “Unclamp” button until the clamping mechanism is fully opened.
2. Carefully load the pallet onto the platform using a fork truck. Carefully shift the load against
the side panel to help prevent the load from falling during rotation. Do not drop the load
onto the platform. Move fork truck
clear of the machine.
3.
Press and hold the “Clamp” button
until the load is securely held by
the clamping mechanism. The
load should be clamped such that
it is securely held in place but not
crushed or damaged.
Clamp pressure can be adjusted
with pressure adjustment knob
located on the rear panel of the
machine. Turn knob clockwise
to increase pressure; counter
clockwise to decrease pressure.
4.
Press and hold the “Rotate CW” or
“Rotate CCW” buttons to rotate the
load. Release the button as soon as the rotator reaches the end of travel.
Do not unclamp the load until the rotator has rotated the full 180°.
Releasing the load early will allow the load to fall out off of the pallet and
could lead to injury.
5.
Press and hold the “Unclamp” button until the clamping mechanism is fully
opened. Make necessary adjustments to the load.
6.
Press and hold the “Clamp” button until the load is securely held by the
clamping mechanism.
7. Rotate the load back to the original orientation.
8. Release the clamp and remove the load.
CLAMPING
PRESSURE
GUAGE
SIDE PANEL
CLAMPING
PRESSURE
ADJUSTMENT
KNOB
