14
Southworth Products
SR-44 Manual
5. Operation
Only trained and/or qualified personnel shall operate this machine. Personnel operating
this machine must read and understand this manual.
Do not sit, stand, or ride on platform.
Crush hazard. Always ensure load is securely clamped before rotating.
Do not stand in front of the machine while clamping and rotating.
Guard rails must be installed before operating this machine.
Do not enter within the guardrails unless the machine has been secured
with the maintenance chains and the machine has been deenergized.
5.1 Before Each Use
• Inspect the machine for excessive wear or damage.
• Verify all precautionary labeling is in place and legible.
• Inspect controls and cords for damage.
•
Inspect for hydraulic leaks and loose fittings.
• Inspect controller and cord for damage.
• Verify controls function correctly by rotating and clamping without a load.
• Verify the machine moves smoothly through the rotation and clamping movements.
5.2 Loading
Loads must not exceed the maximum load rating.
Before loading, rotate the machine in either direction until it reaches the
end of travel. Immediately release the button once the end of travel is
reached. The machine must only be loaded and unloaded when the side
panel is vertical.
5.2.1. Load Restrictions
Model
Min Load Height Max Load Height Max Load Weight
SR44-60
30”
60”
4,400 lb
SR44-72
42”
72”
4,400 lb
SR44-84
54”
84”
4,400 lb
