Southland OMD-525X Скачать руководство пользователя

Страница: 7 / 36

1.4.2

General Safety & Installation (VDC)

This section summarizes the precautions applicable to the OMD-525X Oxygen Analyzer. Additional pre-

cautions specific to this analyzer are contained in the following sections of the manual. To operate the

analyzer safely and to obtain the best performance, follow the basic guidelines outlines in this owner’s

manual.

CAUTION:

WARNING:

CAUTION:

This symbol is used throughout the owner’s manual to warn and alert the

user of the presence of electrostatic discharge.

This symbol is used throughout the owner’s manual to caution and alert

the user to recommended safety and / or operating guidelines.

This symbol is used throughout the owner’s manual to caution and alert

the user that this device is operated on DC Voltage (VDC)

READ INSTRUCTIONS: Before operating the oxygen analyzer, read the instructions.

RETAIN INSTRUCTIONS: The safety precautions and operating instructions found in the owner’s

manual should be retained for future reference.

FOLLOW INSTRUCTIONS: Observe all precautions and operating instructions. Failure to do so may

result in personal injury or damage to the transmitter.

OXYGEN ANALYZER LABEL:

Introduction

OMD-525X Oxygen Analyzer

Designed, Tested, and Assembled in California, USA

4045 E. Guasti Rd. #203 Ontario, CA 91761 USA : 1-949-398-2879 : [email protected] : www.sso2.com

Model Number:

OMD-525X

Serial Number:

0036785

Oxygen Analyzer

Voltage: 10 - 28 VDC

Max Current: 100mA

4045 E. Guasti Rd. #203 Ontario, CA 91761 USA

Ph: (949) 398-2879 Web:

www.sso2.com

This section is for DC powered analyzers, if your analyzer is AC powered see the previous page.

Содержание OMD-525X





































Результаты поиска

Содержание OMD-525X

Отзывы:

Похожие инструкции для OMD-525X

Бренды по названию

Популярные бренды

Southland OMD-525X, Инструкция по эксплуатации

Результаты поиска

Содержание OMD-525X

Отзывы:

Похожие инструкции для OMD-525X

Бренды по названию

Популярные бренды