Manual P/N 211.410K
Updated 11292018
10
Flame Pack Series 400 Operation and Service Manual
6.0: Part Identification
Number
Name
Description
1
SCC 276.400K Detect Probe
Supplies voltage to the cell and detects
current flow due to ionization
2
SCC 272.497 Cell and Mount
Assembly
Fuel and air mixture burns inside the cell.
Ionization occurs within the flame.
3
SCC 265.404 Igniter Lead
(replacement kit)
The igniter lead carries electrical energy
from the igniter into the cell where it acts
as a spark plug, igniting the fuel/air
mixture.
4
SCC 282.440K Pump-to-Cell Tube
This is a formed tube that carries the fuel
and air from the pump to the cell.
5
SCC 281.435 Pump Assembly
(restricted sale)
The fuel moving through the pump mixes
with the sample from the probe.
6
SCC 822.420K Regulator
Reduces fuel pressure from the cylinder to
an operational level.
7
SCC 823.400K Fuel Valve
Turns the fuel supply to the unit on and
off.
8
SCC 846.300K Fuel Cylinder
A stainless-steel cylinder that holds 300 cc
of fuel at 1800 psi.
9
SCC 824.211K Check Valve
Provides means of refilling fuel cylinder.
10
SCC 862.065K End Cap
Prevents contamination of the check valve.
Protects the check valve threads.
11
SCC 265.151K Thermocouple (TCPL)
Produces an electrical signal dependent
upon the temperature in the cell.
12
SCC 281.413K Exhaust Flame
Arrestor
Installed into the cell assembly, it provides
SOME protection should the Flame Pack
Model 400 be used in an explosive
atmosphere.
10
9
8
7
6
5
15
14
13
4
11
3
1
12
2
Figure 3: Part Identification
