S660N GNSS Network RTK Receiver
7.2. Field operation procedure
1)Set up a tripod on the control point, leveling and centering strictly on the measuring point.
2)Measure the instrument height three times, the difference of the results shall not be more than 3 mm, and average
the results. The instrument height should be measured from the center of the control point to the mark line on the
instrument.(Refer to 7.1.)
3)Record instrument number, point name, instrument height, and start time.
4)Power on receiver, confirm the static mode, the mainframe begins to search satellites and satellite lights begin to
flash. Recording condition reached, the status light flashes in accordance with the set sampling interval, flashing
once indicates the acquisition of an epoch.
7.3. Mode Configuration
Static mode of S660N receiver is able to be set on internal web UI or on controller software (eg.GIStar for Android).
In this section, we will respectively introduce how to configure static mode on web UI and controller software
(GIStar).
Configure on Web UI
Switch on S660N receiver in normal way, then connect receiver to computer via LEMO Ethernet port, or connect
receiver to tablet or smartphone via WIFI connection. Input admin for both username and password to login the
web UI server.
Go to Configuration
—
General Config, switch the working mode into Static, click on
button to
confirm the settings.