S660N GNSS Network RTK Receiver
3.2. Reset
At the bottom of S660N receiver, there is a small key besides to Power button, that is the Reset key mainly used to
force turning off receiver if there is something block with power button to switch off the receiver.
For example, if the receiver can t be switched off by power b
utton, use this key to force switching off receiver, then
restart the unit in normal way.
3.3. Self-check
Self-check is an important operation for south receiver during its use on the field. If there is something abnormal on
receiver or the receiver doe
sn t work properly, perform
ing self-check operation for receiver will be helpful on
judging roughly what happen to the receiver.
Self-check operation is easy to perform on S660N receiver, keep pressing power button for a while (about 8
seconds) until all of indicators light up together, at this moment, release power button and the receiver is
performing self-check procedure, then the indicator will light up one by one from right to left, after that the
self-check is completed and the receiver will get into normal state, starts to track satellites.
Light up together
Lights up, OEM board
is
checked
and
completed
Lights
up,
WiFi
module is checked
and completed
Lights up, Bluetooth module
is checked and completed,
the self-check procedure is
completed