S660N GNSS Network RTK Receiver
6) Choose
Date Collector Internet
as your link device and click on
Setup
to go on. Verify that the Data Port
of Port Options is
Shared
, then en
ter the IP address, port, assigned name and password for NTRIP connection,
after that
, when you back on Link Configure page then click
Connect
again to start the NTRIP connection.
7) If the receiver connected to a mount point before, reconnect directly this mount point which has been stored on
handheld. Or
request the whole sourcetable if you first time to connect the NTRIP broadcaster. Tap on
Request
Sourcetable
and the available mount
points for corrections will be downloaded to your handheld.