manualshive.com logo in svg

Sound Devices PIX 250i, Руководство пользователя и техническая информация

Поделиться
Скачать
Sound Devices PIX 250i Скачать руководство пользователя страница 83

PIX 250i User Guide and Technical Information

77

W

ar

ranty & T

ec

hnical Suppor

t

Warranty and Technical Support 

Warranty & Service 

Sound Devices, LLC warrants the PIX 250i Video Recorder against defects in materials and work-

manship for a period of TWO (2) years from date of original retail purchase. This is a non-transfer-

able warranty that extends only to the original purchaser. Sound Devices, LLC will repair or replace 

the product at its discretion at no charge. Warranty claims due to severe service conditions will be 

addressed on an individual basis. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE 

EXCLUSIVE. SOUND DEVICES, LLC DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR 

IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU-

LAR PURPOSE. SOUND DEVICES, LLC IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR 

CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY 

OTHER LEGAL THEORY. Because some jurisdictions do not permit the exclusion or limitations set 

forth above, they may not apply in all cases. 

For all service, including warranty repair, please contact Sound Devices for an RMA (return mer-

chandise authorization) before sending your unit in for repair. Product returned without an RMA 

number may experience delays in repair. When sending a unit for repair, please do not include ac-

cessories, including SSD drives, CF cards, batteries, power supplies, carry cases, cables, or adapters 

unless instructed by Sound Devices. 

Sound Devices, LLC  

Service Repair RMA #XXXXX  

E7556 State Rd. 23/33  

Reedsburg, WI 53959 USA  

telephone: (608) 524-0625 

Technical Support / Bug Reports 

For technical support and bug reporting on all Sound Devices products contact: 

Sound Devices, LLC  

E-mail:  

[email protected]

  

web: 

www.sounddevices.com/support/

  

Telephone:  +1 (608) 524-0625 / Toll-Free in the U.S.A.:  (800) 505-0625  

Fax:  +1 (608) 524-0655 

Sound Devices hosts a user support forum. The URL is: 

 

http://forum.sounddevices.com

 

Sound Devices cannot guarantee that a given computer, software, or operating system configuration 

can be used satisfactorily with the PIX 250i based exclusively on the fact that it meets our minimum 

system requirements.

Содержание PIX 250i





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды