Sound Devices PIX 250i Скачать руководство пользователя страница 54

Страница: 54 / 84

PIX 250i User Guide and Technical Information

v. 2.00

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Ext
er

nal Contr

OSD Menu

The OSD Menu (On-Screen dispaly) provides quick access via the web browser to the PIX 250i

Timecode/Sync

menu options. Menu settings are displayed and can be edited directly from the web

browser.

Remote Menu

The Remote Menu provides quick access via the web browser to the PIX 250i

Remote Control

options. Menu settings are displayed and can be edited directly from the web browser.

Network Menu

The Network Menu provides quick access via the web browser to the PIX 250i

Network

menu op-

tions. Menu settings are displayed and can be edited directly from the web browser. In this menu the

Ethernet File Transfer

option can be remotely activated. This allows for remote transfer of files from

the PIX 250i.

System Menu

The System Menu provides quick access via the web browser to the PIX 250i

System

menu options.

Menu settings are displayed and can be edited directly from the web browser.

Triggering Recording from External Timecode

The PIX 250i can be configured to start recordings when incoming timecode begins rolling and stop

when it becomes stationary. This is generally referred to as Record Run timecode. The master time-

code device should be setup in this manner. To configure the PIX 250i to follow Record Run com-

mands:

1. Set Setup Menu option

[Remote Control - Rec Start/Stop]

Timecode

2. Make sure that the device that is sending timecode is configured to send stationary timecode

while stopped and running timecode while recording.

3. Some cameras do not send the correct timecode in the first few seconds of a recording, or

they send short bursts of timecode causing the PIX 250i to record short unintentional files.

The

[Timecode/Sync - Auto Record Hold Off]

feature is designed to eliminate these issues.

When a hold off value is applied, the PIX 250i will begin capturing the moment timecode

begins rolling but will only go into record if a valid timecode signal is present after the hold

off time has elapsed.

Triggering from external timecode will not cause the PIX 250i to automatically stamp ex-
ternal timecode to recorded files. The timecode stamped to files is determined by the setting

[Timecode/Sync - Timecode Mode]

Triggering Recording from SDI Flag Bits

Start and stop flags embedded in the SDI signal from some cameras can be used to

start and stop recording of the PIX 250i. To enable this feature, set Setup Menu option

[Remote Control - Rec Start/Stop]

to the

SDI Flag

option that refers to the manufacturer of the con-

nected camera.

Содержание PIX 250i





















































































Результаты поиска

Содержание PIX 250i

Отзывы:

Бренды по названию

Популярные бренды

Sound Devices PIX 250i, Руководство пользователя и техническая информация

Результаты поиска

Содержание PIX 250i

Отзывы:

Бренды по названию

Популярные бренды