Sound Devices PIX 250i Скачать руководство пользователя страница 65

Страница: 65 / 84

PIX 250i User Guide and Technical Information

tup Manag

ement & F

e U

rades

The Settings Customization Menu option

Reset to Factory Settings

will make all Setup Menu items

visible and revert default settings to factory defaults.

Factory Restore

To fully restore the unit to its factory firmware state, hold the Fast Forward and Stop but-

tons while booting the PIX 250i up, until the Main View appears. This will load fac-

tory default settings and restore some settings that are normally not affected by performing

[Quick Setup - Load Factory Settings]

, such as restoring the network user name and password to

“guest”.

Firmware Upgrades

At times, Sound Devices makes firmware updates available for PIX 250i. These updates are easy to

apply:

1. Download the new .prg file from the Sound Devices website.
2. Copy this file to an approved drive, and connect to the PIX 250i.
3. Ensure that the power source for the PIX 250i is reliable. Power loss during a firmware up

grade process can produce unexpected results.

From the

System

menu in the Setup Menu, select

Firmware Update

. The PIX 250i will search

for the .prg file and give the option to install the first file that it finds (cancelling this dialog

will cause the PIX to search for another .prg on any attached storage devices). When the cor

rect .prg file has been located, highlight the

button and press the Control Knob to begin

the firmware update.

5. The PIX will verify that the file is not corrupted, then it will update the firmware. When done

the unit will need to be powered down and then back up.

Firmware updates can take several minutes to complete. Never pull power during a firmware update.

Содержание PIX 250i





















































































Результаты поиска

Содержание PIX 250i

Отзывы:

Бренды по названию

Популярные бренды

Sound Devices PIX 250i, Руководство пользователя и техническая информация

Результаты поиска

Содержание PIX 250i

Отзывы:

Бренды по названию

Популярные бренды