Sound Devices PIX 250i, Руководство пользователя и техническая информация

Страница: 47 / 84

PIX 250i User Guide and Technical Information
41
N
etw
or
k Gr
ouping
Adding and removing cue markers, jumping to cue markers, and looped playback is not supported
in grouped units. These features can be effectively used in a grouped unit setup; However, manual
setup on each unit in the group is required. Following are step-by-step instructions to using these
features with grouped units. Failure to comply with these recommendations can result in undesired
behavior if any one of these features is in use while units are grouped. This could include:
• Out-of-sync playback between grouped units
• Some units in the group dropping out of playback prematurely
• Some units playing back the wrong file
• Sluggish transport control response time
To effectively use Loop Play Mode with grouped units:
1. Press and hold Play until the OSD reads LOOP.
2. Repeat step 1 on all units in the group. Now when a clip is looped, the units will remain in
sync.
To effectively use Cue Markers with grouped units:
1. Playback a file.
2. Find the spot in the file in which a cue marker is to be placed.
3.
Pause Playback.
4. Press FILES + Fast Forward to lay a cue marker.
5.
Repeat step 4 for all units in the group. Now when jumping to a cue marker on one unit all
units in the group will also jump to the cue point and remain in sync.
To loop between cue points on grouped units:
1. With Loop Mode on and Cue Markers all set, locate the cue point in which the loop will
begin.
2. Press Play + Fast Forward to change the Loop behavior from Loop Clip to Loop Segment
mode. The OSD will display the loop points (for example
Cue 1 - Cue 2
).
3. Repeat step 2 on all units in the group. All units in the group will now loop between the
selected cue points and remain in sync.
Grouped Settings
A settings change of any unit in the group will be rippled through to all other units in the group,
with some exceptions. The following settings and functions will always apply only to the unit that
they are made on, and not ripple through to other units in the group:
• All
[Network]
options.
• All
[Quick Setup]
options.
•
[File Storage - Erase/Re-format]
•
[Timecode/Sync - Timecode Mode]
•
[Timecode/Sync - Jam Received TC]
•
[Timecode/Sync - Jam Time of Day]
•
[Timecode/Sync - Set Generator TC]
•
[Timecode/Sync - Set Generator UBits]
•
[System - Set Date/Time]
•
[System - Update Software]