Sound Devices 970 Скачать руководство пользователя страница 55

Страница: 55 / 72

970 User Guide and Technical Information

tup Menu Op

tions

Setup Menu Options

The Setup Menu controls a wide range of parameters for the 970. The parameters are organized into

categories, making the Setup Menu easy to navigate. The following tables show the parameter name,

a description, options available, and the factory default setting where applicable.

Default settings can be altered. (

See “Setup Management and Firmware Upgrades”, page 46

)

File Storage

Parameter Name

Description

Options

Drive Record/Network Mode

A sub-menu with 4 items representing each drive slot.

Options presented here are available for each of the 4

drive slots.

Read Only

: Drive is not used for record-

ing, but is available for playback.

Record

: Drive will

be written to during recording and is unavailable for

network file transfer.

Ethernet File Transfer

: Drive is

available for network access via Samba and unavail-

able for recording and playback.

Switch to Network

upon Full

: Drive is effectively in Record mode until it

becomes full, at which point it is effectively in Ethernet

File Transfer mode.

• Read Only

» Record

• Ethernet File Transfer
• Switch to Network upon Full

Wave File Split Every

Choose the file size limit of .wav files. When the limit

is reached, the 970 will create a new .wav file (labeled

sequentially with an alpha character) and continue

recording.

• 2 GB

» 4 GB

File Name Format

The format for file names as they are written to the

drive.

» Drive-Reel-Clip

•  Reel-Clip
•  CamID-Reel-Clip
•  Reel-Scene-Take
•  Scene-Take

File Name Prefix

Text to be placed before all other charac-

ters in each file name. 970 Name is set in

[Network - This 970's Name]

• Off

» 970 Name

CamID

An identifying character for a camera

» A

(single alpha to “Z”).

Reel

Current Reel number. When the Reel number is

altered, the Clip number is reset to 1

• 1
(multi alphanumeric)

Clip

Current Clip number. When the Reel or Scene is

altered, the Clip number is reset to 1

» 1

(numeric)

Scene/Shot

Current Scene name. When the Scene name is

altered, the Take number is reset to 1.

» “Scene 1”

(multi alphanumeric)

Take

Current take number. When the Scene name is

altered, the Take and Clip number is reset to 1.

» 1

(numeric)

Scene Increment Mode

The method used to increment the Scene/Shot value

when Stop+Fast Forward is pressed on the Main View.

• Disabled

» Numeric

• Character

Erase/Re-format

Format any or all attached drives. When all is se-

lected, all drives will share the same volume label but

each drive name will be suffixed with a unique drive

number.

•  Erase/Re-format: Drive 1
•  Erase/Re-format: Drive 2
•  Erase/Re-format: Drive 3
•  Erase/Re-format: Drive 4
•  Erase/Re-format: All drives

Содержание 970









































































Результаты поиска

Содержание 970

Отзывы:

Похожие инструкции для 970

Бренды по названию

Популярные бренды

Sound Devices 970, Руководство пользователя и техническая информация

Результаты поиска

Содержание 970

Отзывы:

Похожие инструкции для 970

Бренды по названию

Популярные бренды