manualshive.com logo in svg

Sound Devices 970, Руководство пользователя и техническая информация

Поделиться
Скачать
Sound Devices 970 Скачать руководство пользователя страница 11

970 User Guide and Technical Information

5

Panel Descr

ip

tions

PIX-CADDY 2 and PIX-CADDY CF (Optional)

The PIX-CADDY 2 is an accessory to connect approved 2.5” drives to the front-panel drive bays. The 

PIX-CADDY CF is an accessory to connect approved CompactFlash cards to the front-panel drive 

bays (Supports poly WAV File Format only). When removed from a 970, the PIX-CADDY 2 operates 

as a high-speed drive interface to Mac OS and Windows computers via the onboard FireWire800, 

USB 3.0, or the optional PIX-DOCK Thunderbolt interface.

For reliable operation, it is imperative that the 2.5” drive be firmly screwed to the PIX-CADDY 2 with 
the supplied screws. Some thinner drives may require the use of the PIX-SHIM accessory to ensure a 
solid fit.

PIX-CADDY CF

PIX-CADDY 2

6

5

3

4

8

7

2

2

1

1) 

FireWire 800

 

FireWire 800 connector. Requires a pow-

ered FireWire 800 or 400 port. Backward 

compatible when using Firewire 800 to 

400 cable.

2) 

eSATAp

 

High-speed data transfer over 5V  

eSATAp. Requires a 5V powered eSATAp 

port. 

3) 

USB 3.0

 

High-speed data transfer over USB 3.0 

(backward compatible with USB 2.0).

4) 

2.5” Drive Slot

 

Connector for approved 2.5-inch SATA 

II and SATA III drives. Sound Devices 

maintains a list of tested and approved 

SSD’s or hard drives. Visit 

www.soundde-

vices.com/approved

 for an up-to-date list of 

tested and approved drives.

5) 

Activity LED

 

Illuminates when recording, playing, 

reading, or writing to the media. Do not 

remove the caddy while the Activity LED 

is illuminated. 

LED does not illuminate 

when connected to a computer’s eSATA port.

6) 

Release Latches

 

Secures the PIX-CADDY 2 to the recorder. 

Press both latches to remove the caddy 

assembly.

7) 

Screw Holes

 

For reliable operation, it is imperative that 

the 2.5” drive be firmly screwed to the 

PIX-CADDY 2 with the supplied screws.

8) 

CF Slot

 

Connector for approved CompactFlash 

media. Sound Devices maintains a list of 

tested and approved CF cards. Visit 

www.

sounddevices.com/approved

 for an up-to-

date list of tested and approved drives.

Содержание 970









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды