Sound Devices 970 страница 56 Скачать руководство пользователя

Страница: 56 / 72

970 User Guide and Technical Information

v. 2.02

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

tup Menu Op

tions

Audio

Parameter Name

Description

Options

File Format

Set recording to be mono or poly WAV files.

» Poly

• Mono

Sample Rate

The sample rate of recorded .wav files

•  44.1 kHz
•  47.952k
•  47.952kF

» 48k

•  48.048k
•  48.048kF
•  88.2k
•  96k

Bit Depth

The bit depth of recorded .wav files

• 16-bits

» 24-bits

Pre-Roll Time

The amount of pre-record buffer. 0-10 seconds in 1

second increments.

» 2 secs

(0-10 seconds)

Input Gain Linking

When Input Gain is linked, adjusting an Input’s gain

adjusts all Input Gains by the same amount. Any

offsets at the time of linking are maintained.

» Off

• On

Input Delay Linking

When Input Delay is linked, adjusting an Input’s delay

adjusts all Input delays by the same amount. Any

offsets at the time of linking are maintained.

» Off

• On

MADI Input

Select MADI input source (optical or BNC). Auto-

Detect will detect which source is connected and

automatically choose that port. When there is signal

on both sources, the Optical source is used.

» Auto-Detect

• BNC
• Optical

HP Source

Choose the source for Headphone output and the 2

channel meters on the Main View.

• Odd / Even channel pairs (1,2 to

63,64)

• All tracks summed - mono

» All tracks summed - stereo

Line Ouput

Sub-menu. Choose output source for each line output

(1-8)

• Track 1 - Track 64 (per output)

» Track 1-8 (per output)

AES Output

Sub-menu. Choose output source for AES outputs

(1-8)

• Track 1 - Track 64 (per output)

» Track 1-8 (per output)

MADI Output

Sub-menu. Choose output source for MADI output

(1-64)

• Track 1 - Track 64 (per output)

» Track 1-64 (per output)

Signal Generator

Enable audio test tone to all outputs and meters. Tone

is not recorded.

» Off

• On

Tone Level

Level of audio test tone (dBFS)

» -20 dBFS

(numeric -40 to 0)

Audio Screen Meters

Amount of audio tracks displayed at a time in the Main

View. (All 64 tracks are accessible by scrolling)

• 8

» 16

• 32

Содержание 970









































































Результаты поиска

Содержание 970

Отзывы:

Похожие инструкции для 970

Бренды по названию

Популярные бренды

Sound Devices 970, Руководство пользователя и техническая информация

Результаты поиска

Содержание 970

Отзывы:

Похожие инструкции для 970

Бренды по названию

Популярные бренды