Sound Devices 970 Скачать руководство пользователя

Страница: 44 / 72

970 User Guide and Technical Information

v. 2.02

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Stor

e & F

ile Manag

ement

Mac OSX 10.6.4 and below does not support exFAT volumes.

Formatting

To format a drive:

1. Make sure the drive to be formatted is connected to the recorder and note which drive num-

ber it is.

2. Open Setup Menu option

[File Storage - Erase/Re-format]

Choose the

Erase/Re-format: Drive Number

for the drive to be formatted or

Erase/Re-format: All Drives

option.

4. A confirmation dialog will appear: “All data will be erased. Continue?”. Use the Control

Knob to select

5. Use the displayed on-screen keyboard (or an external USB keyboard, if attached) to enter a

volume label for the drive, and then use the Control Knob to select

to initiate the format.

When formatting all drives at once, the volume label is applied to all drives but each drive

will be suffixed with a dash character and drive number to distinguish between drives.

Drive formatting can alternatively be initiated from PIXNET under the File Storage menu.

Drive Modes

Each of the four drive slots can be set to

Read Only

Record

Ethernet File Transfer

, or

Switch to Network upon Full

from the Setup Menu option

[File Storage - Drive Record/Network Mode]

•

Read Only

: Drives in this mode will not be written to during recording. Any compatible files on

the drive will still be available for playback and the drive can still be formatted.

•

Record

: Drives in this mode will be written to for recording. This is the default mode.

•

Ethernet File Transfer

: Drives in this mode will be shared to the network as a standard Samba

share (see Ethernet File Transfer) and cannot be recorded to, formatted, or accessed for playback

from the unit.

•

Switch to Network upon Full

: Drives in this mode will be in Record mode until they are filled.

Once filled, they will be put into Ethernet File Transfer mode.

File Management

The 970 provides several tools for file management and metadata entry. File management of files to

be recorded is managed in

File Storage

. File management for files previously recorded is handled in

the File List.

See File List and Take Details for navigation and basic overview

File Size Limit

The Broadcast Wave File specification calls for a 4GB maximum file size. The 970 will automatically

begin writing a new file after the file size limit has been reached. The beginning of this new file will

be seamless to the ending of the previous file. The default file size is 4GB. This can be reduced to 2

GB in

[File Storage - Wave File Split every].

Содержание 970









































































Результаты поиска

Содержание 970

Отзывы:

Похожие инструкции для 970

Бренды по названию

Популярные бренды

Sound Devices 970, Руководство пользователя и техническая информация

Результаты поиска

Содержание 970

Отзывы:

Похожие инструкции для 970

Бренды по названию

Популярные бренды